Diagnostische Test voor het Beoordelen van De Leverfunctie Lab.Home Liver-Screen

Place the contents of the box on a clean, dry, and flat surface, such as a table, and then:

1. Thoroughly wash your hands with soap, rinse them with clean running water, and dry them.

2. Tear open the aluminum packet along the edges, then remove the test strip and the plastic pipette. Discard the desiccant packet.

3. Prepare the lancing device. Unscrew, remove, and dispose of the gray cap without touching the release button.

4. Disinfect the chosen fingertip and gently massage it to improve blood circulation.

5. Firmly press the lancet against the disinfected fingertip and press the release button to activate the lancet.

6. The tip of the lancing device will automatically retract for safety after use.

7. Gently massage the pricked fingertip to produce blood droplets.

8. Without squeezing the pipette, bring its tip close to the blood droplet. The blood will migrate through the capillary to the marked line on the pipette. You may massage to obtain another drop of blood if the line on the pipette is not reached. Try to avoid air bubbles in the pipette if possible.

9. Transfer the collected blood to the sample well of the test plate by squeezing the pipette tip.

10. Wait 30-40 seconds until all the serum settles into the sample.

11. Unscrew the blue cap and add 4 drops of diluent to the sample well. Hold the diluent bottle vertically.

12. Read the test result after 10 minutes. Do not interpret the test result after 15 minutes.