Builder Gel Reney Cosmetics Builder Gel

1. Degrease the nail surface. Move aside the cuticle, remove the shine from the nail plate with 180/240 grit milky. Remove dust. Apply Nail Dehydrator.
2. Apply an acidic Acid Primer or an acid-free Bond Control primer of your choice, depending on the condition of the nail plate. Use an acidic primer when the nail plate is very wet; an acid-free primer is suitable for normal nail. The Acid Primer should be applied with a semi-dry brush in a small amount, without touching the skin. The product evaporates from the plate on its own.
3. As a base, use a UV/LED Builder Gel. Apply in a thin layer with rubbing movements. Cure in LED lamp for 30-60 sec.
4. Install the template one by one on each finger and lay out a thin substrate of the desired length and shape, simulate the architecture of the nails with a gel of the selected shade. Then we send it to the lamp for complete polymerization of the gel for 60 seconds. *
5. Remove residual stickiness with Gel Cleanser.
6. Carry out a phased sawing with a file 180/240 grit.
7. Apply a topcoat to give shine and protect against chips and scratches, curing for 60 seconds.